Cisco Meraki Chat Commands¶

`/meraki` Command¶

Interact with Cisco Meraki by utilizing the following sub-commands:

Command	Arguments	Description
`get-organizations`		Gather all the Meraki Organizations.
`get-admins`	`[org_name]`	Based on an Organization Name Return the Admins.
`get-devices`	`[org_name]` `[device_type]`	Gathers devices from Meraki.
`get-networks`	`[org_name]`	Gathers networks from Meraki.
`get-switchports`	`[org_name]` `[device_name]`	Gathers switch ports from a MS switch device.
`get-switchports-status`	`[org_name]` `[device_name]`	Gathers switch ports status from a MS switch device.
`get-firewall-performance`	`[org_name]` `[device_name]`	Query Meraki with a firewall to device performance.
`get-wlan-ssids`	`[org_name]` `[net_name]`	Query Meraki for all SSIDs for a given Network.
`get-camera-recent`	`[org_name]` `[device_name]`	Query Meraki Recent Camera Analytics.
`get-clients`	`[org_name]` `[device_name]`	Query Meraki for List of Clients.
`get-neighbors`	`[org_name]` `[device_name]`	Query Meraki for List of LLDP or CDP Neighbors.
`configure-basic-access-port`	`[org_name]` `[device_name]` `[port_number]` `[enabled]` `[vlan]` `[port_desc]`	Configure an access port with description, VLAN and state.
`cycle-port`	`[org_name]` `[device_name]` `[port_number]`	Cycle a port on a switch.

Note

All sub-commands are intended to be used with the /meraki prefix.

Screenshots¶

Running /meraki get-organizations.

Example output for get-organizations

Running /meraki get-networks.

Example output for get-networks

Running /meraki get-switchports-status.

Example output for get-networks

Since the output was cut off the output example is below:

Port   Enabled      Status         Errors       Warnings   Speed    Duplex    Usage (Kb)    Client Count    Traffic In
                                                                                                              (Kbps)
========================================================================================================================
1      True      Connected                                 1 Gbps   full     total: 46687   1              total: 4.3
                                                                             sent: 27405                   sent: 2.5
                                                                             recv: 19282                   recv: 1.8
2      True      Connected                                 1 Gbps   full     total: 10086   1              total: 1.0
                                                                             sent: 9481                    sent: 0.9
                                                                             recv: 605                     recv: 0.1
3      True      Disconnected   Port                                         total: 0       0              total: 0
                                disconnected                                 sent: 0                       sent: 0
                                                                             recv: 0                       recv: 0
4      True      Disconnected   Port                                         total: 0       0              total: 0
                                disconnected                                 sent: 0                       sent: 0
                                                                             recv: 0                       recv: 0

To demonstrate a example of configuration updates. There is a simple configuration ability for access ports. /meraki configure-basic-access-port

Specify Org, Switch, and Port ID.

Example output for config-port0

Fill out the Port Specific Configuration.

Example output for config-port1

Result of the configuration.

Example output for config-port2

Cisco Meraki Chat Commands¶

/meraki Command¶

Screenshots¶

`/meraki` Command¶